Power Valves Pics

This is the last problem I have to overcome .. It is very usuall problem for the VJ22 RGV .. The pin either snaps or destroys the middle part lettong it slip in to the cylinder .. The solution is either to replace all the valves with brand new aftermarket ones or place pin implants ...

I will either buy or manufacture my own implants ...

Cylinder Head Pics

I think its needless to spot the differences between the stock heads and the sweet kit spec heads by Con Dziobon .. These straight cut heads are volumed for unleaded fuel and have angled squish bamd and conical chambers .

Bottom End Pics

The bottom end is ready ...!!!!!!!!!!! . Everything new , everything replaced . Also included new clutch plates .. Crankcases were polished and slightly ported . The oil pump was tested to insure that it still works. Reed cages remained stock with stock reeds .

These are the most recent photos of my project .. There are few maore things to be striped down from the frame so it can be polished ...