Towards The end

Almost everything is ready . The only thing that is holding me back is that I am still waiting for the chambers to arrive by post , Besides that the bike is ready for the first start after 2,5 years. Will be putting some parts off the body panels today.

TYGA Chambers

Just order my Tyga Pipes..
Mild steel chambers with aluminium silencers
Total cost 320 Euro with Air mail delivery (5-10 Days)

Power Valves

Power valves finally ready and looking really good.. Total cost including the pins 100 euro

Cylinders ready to be ported !!

Its been awhile and I am seriously starting to miss riding my rgv ... Had to sent my cylinders twice to Holland in order to have them replated since the first time , the least I can say , was unsatisfactory ... Anyway the cylinders are back and in perfect condition ... Now its time to port them and most important polish all the ports to perfection ...
Hope I will manage to ride my beauty by September ...

Power Valves Pics

This is the last problem I have to overcome .. It is very usuall problem for the VJ22 RGV .. The pin either snaps or destroys the middle part lettong it slip in to the cylinder .. The solution is either to replace all the valves with brand new aftermarket ones or place pin implants ...

I will either buy or manufacture my own implants ...

Cylinder Head Pics

I think its needless to spot the differences between the stock heads and the sweet kit spec heads by Con Dziobon .. These straight cut heads are volumed for unleaded fuel and have angled squish bamd and conical chambers .

Bottom End Pics

The bottom end is ready ...!!!!!!!!!!! . Everything new , everything replaced . Also included new clutch plates .. Crankcases were polished and slightly ported . The oil pump was tested to insure that it still works. Reed cages remained stock with stock reeds .